Torso support EB-LK-02

Product description

Lumbar support belt high chest with inelastic tightening bands 4Flex – Lox is one of the tallest and strongest stabilizing the trunk orthoses offered by REH4MAT. It was made according to a new more anatomical shape, so that the product adapts better to each figure and much better stabilizes lumbar – thoracic spine.

The back part of the orthosis is made of new innovative material AirSanmed II™.

Fasteners of the product are made in the new asymmetric way. This allows for a better fit of the product to the patient in terms of one size. The fastenings have been made in assimetric way. This let for better fitting the product to patient’s body in one size range.

In the back of the brace is installed depending on the size, four or six high, anatomically contoured orthopedic stays.

Orthopedic liners have a specific degree of flexibility that was achieved in the process of hardening and have been in a professional manner protected powder coating, which become resistant to the effects of human sweat.

As the stabilizing elements used in the rear brace system of bilateral double nonelastic tightening straps made of Air Rubber III.

Lox brace is a 2-point orthosis, allowing you to modify any product stabilization force, during the period of coming back the patient to health.

As a spanning two systems were used:

1. Aluminium rigid spine stabilizer equipped with a non-elastic side straps attached to anatomically contoured buckles. At the ends of the bands are mounted plastic components for easy regulations of tensioning assemblies.

Size	Waist circumference	How to measure
S	65-75 cm (25,6″-29,5″)
M	75-85 cm (29,5″-33,5″)
L	85-97 cm (33,5″-38,2″)
XL	97-110 cm (38,2″-43,3″)
XXL	110-125 cm (43,3″-49,2″)
XXXL	125-145 cm (49,2″-57,1″)

Total height of the product:
front: 19 cm (7,5″)
rear: 38 cm (15″)

Click on the photo to enlarge

MATERIALS

AirRubber III™

AirRubber III™ has unidirectional elasticity. It can be stretched, increasing the length, not width, what improves compression. Between the braids air flows freely and skin can breathe. In addition in high compression, these rubber braids provide a gentle massage for skin. Our orthopedic rubber is very friendly for skin.

AirSanmed II™

AirSanmed II™ is a multi layered intelligent orthopedic textile which is perfect for orthopedic braces production. It helps to maintain its functionality and high comfort of use. External vapour barrier is washable and possible to chemical or vapour disinfection. It is perforated and laminated with off loading foam. Due to this fact, the fabric is breathable and reduces the pressure of aluminum stays and splints. Off-loading foam is connected with soft, comfort foam improving the comfort of use. It’s laminated with soft, breathable cotton with pH neutral for human’s skin. This knitted cotton is certified with OekoTex Standard100 and fully skin-friendly.

TECHNOLOGICAL SYSTEMS

2in1 SOLUTION - full comfort, simply use

2in1 SOLUTION is another innovative solution that is aimed at perfect fitting of REH4MAT braces to different patients' needs. It is common knowledge that our main idea is to provide comfort and stabilization to the knee joint and ensure the most easy way of using our braces. That is why, work of our technologists has already ended with the real success! They have designed 2in1 SOLUTION and used it in some of our knee stabilizers. 2in1 SOLUTION is a unique project that connects both open knee brace function (it’s easy to putting on) and closed brace function (very good patella and knee stabilization). To ensure such a great stabilization the braces was equipped with anatomic-shaped patella donut). An additional advantage of 2in1 SOLUTION is an unrepeatable design - open popliteal fossa, what improves comfort of use. Such a solution allows skin for breathing and as a result the braces are wearing in a free and effortless way.

STIFFENINGS

Lumbar supports

Low and high lumbar supports are made of polyethylene injection technology. The supports are embossed in the shape of the vertebrae of the spine, thanks to which it does not press on the spine, but relieves the back muscles. The product is equipped with the manufacturer's logo and a path for the seam. They stiffen the lumbar or thoracolumbar spine, relieve the muscle and stabilize the compression bands of the braces.

Orthopedic profiled stays

Orthopedic stays are made of special spring steel, covered with a plastic coating and have rounded and protected ends. They can come in various widths and thicknesses as well as different hardness. They can be pre-shaped or flat. They work in one direction and adapt to the shape of the body while stabilizing the laterally protected part of the body. They are perfectly protected against corrosion, so they are resistant to water, moisture and sweat. Products equipped with them can be washed without removing them from the orthosis. They adjust to the body. The orthopedic stays cannot bend and that is why, they cannot correct the body posture or the secured joint.

Plastic stays

They come in various widths and thicknesses, are made of various types of plastics, such as polyamide, ABS or acrylic, and these features determine their stiffness. Thanks to their design, they are resistant to water, moisture and sweat. Products equipped with them can be washed without having to remove them from the orthosis. Our plastic stays work only in one direction, perfectly stabilize the laterally protected part of the body, adjusting to it at the same time and have a memory function, thanks to which they always return to their original shape. This function causes the stays in the orthosis to stabilize the swollen limb immediately after the injury and after the swelling has come off. The plastic stays cannot bend and that is why, they cannot correct the body posture or the secured joint.

Spine stabilizer

• Declaration of Conformity EC
• Manual
• Manual (other languages)
• Setting up

ACCESSORIES / PRODUCTS TO BE USED WITH

Silicone pressure pad AM-PS

Thermoforming pad AM-PT