Hip support AM-SB-01

AM-SB-01 brace is excellent support for hip joint after hip replacement.

Endoprosthesis is often result of degenerative disease that based on destruction of joint cartilage, joint capsule and other soft tissues. There are bone spurs, called osteophytes, one the femur head and acetabulum surface. Osteophytes usually limit joint movement and typically cause pain.

Hip joint is ball joint where head femur is inside the acetabulum. Reason of the joint degeneration can be improper building (hip dysplasia), growth disturbances or injuries. It can be also caused by metabolic disorders such as osteoporosis or overweight.

Our AM-SB-01 hip brace with side splint is a crucial element while rehabilitation process after joint replacement.

The side splint supports joint against the undesirable motions such as: excessive hip adduction, flexion or rotation, which can cause loosen and shift of the endoprosthesis. It is equipped with range of motion adjustment what is helpful after hip surgeries.

Our hip brace is used after surgery which limits the risk of the endoprosthesis damage.

Product’s description

The hip brace is made of innovative fabric ActivePren™, fastening of ActiveDistance™.

Hip brace AM-SB-06 has wrap around design for perfect fitting. The hip and thigh belt has a wide range of circumference adjustment, thanks to which the brace can be adapted to different body types.

The brace is equipped with side splint with ROM adjustment in every 15 degrees. The splint is made of high quality of sanded aluminum, durable cover what makes splints neutral to the influence of sweat and salt. The splint is covered in special lateral pocket what allows to bring it out and wash the brace.

Additionally, the product has anti-slip silicone to prevent the product from moving during use.

Purpose of use

1. Hip fractures
2. After hip joint replacement – endoprosthesoplasty
3. Hip dislocation
4. Osteoarthrosis (also known as Osteoarthritis)
5. Coxarthrosis
6. Hip joint instability

Size	Waist circumference	How to measure
Universal	min 75 cm – max 140 cm

Size	Thigh circumference 5 cm below the groin	How to measure
Universal	min 40 cm – max 75 cm

Right and left hip specific.

Click on the photo to enlarge

MATERIALS

ActiveDistance™

ActiveDistance™ is an technical off-loading lamination with 3-layered construction. It’s made of EVA foam double-sided laminated with non-elastic polyamide layer that is easy to attach. This self-gripping function of ActiveDistance™ provides wide range of adjustment and perfect fitting. What is important, ActiveDistance™ is non-elastic fabric so it stabilizes your body in a perfect way. Thanks to using the comfort foam, the device is really soft what influences on the comfort of using it. Waterproof material.

ActivePren™

ActivePren™ is an active three-layer material consisting of two elastic jersey cover fabrics and a core made of neoprene foam. This material is characterized by softness and high flexibility. A very important advantage of this material is the fact that it is not a knitted product, it does not have thick fibers, so that the weaves of the material do not imprint on the patient's skin and do not cause abrasionsin places of high compression. Products made of ActivePren are the strongest and most effective stabilizing orthoses available on the market.

STIFFENINGS

Plastic stays

They come in various widths and thicknesses, are made of various types of plastics, such as polyamide, ABS or acrylic, and these features determine their stiffness. Thanks to their design, they are resistant to water, moisture and sweat. Products equipped with them can be washed without having to remove them from the orthosis. Our plastic stays work only in one direction, perfectly stabilize the laterally protected part of the body, adjusting to it at the same time and have a memory function, thanks to which they always return to their original shape. This function causes the stays in the orthosis to stabilize the swollen limb immediately after the injury and after the swelling has come off. The plastic stays cannot bend and that is why, they cannot correct the body posture or the secured joint.

Splint 1R Orthodesign

Szyna ortopedyczna 1R orthodesign, to nowatorskie podejście do tematyki szyn ortopedycznych z regulacją kąta zgięcia i wyprostu. Innowacyjność szyny polega na tym, że w zegarze o średnicy nie przekraczającej 30 mm, zastosowaliśmy regulację kąta zgięcia i wyprostu co 15 stopni. Dodatkowym atutem szyny jest to, że regulacja odbywa się nie przy użyciu wkrętów imbusowych, jak to się odbywało w poprzedniej generacji szyny, lecz za pomocą wkładanych stalowych nitów, które dla ułatwienia wyjmowane są z gniazd kątowych przy użyciu załączonego do szyn magnesu. Wisienką na torcie jest pierścień blokujący, który dzięki systemowi zapadkowemu nie pozwoli na samoczynne przestawienie się wcześniej ustawionego kąta. W ortezach kolana szyny mają odsadzenie goleniowe, co pozwala na bardziej precyzyjne dopasowanie ortezy kolana, a co za tym idzie dokładniej realizują regulację ruchomości stawu, w pozostałych wyrobach zaś, ortezy mają formę prostą. Od spodniej strony zegara zamontowano owalny element do którego doklejono gripper niezbędny do przymocowania do zegara miękkich poduszek bocznych 3D. Szyny te, przy użyciu klucza ortopedycznego będącego w ofercie Reh4Mat, mogą być w niektórych przypadkach indywidualnie dopasowane do kształtu kończyny pacjenta, poprzez ich lekkie dogięcie. Pobierz instrukcję regulacji szyny 1R orthodesign

• Declaration of Conformity EC
• Manual
• Manual (other languages)
• Setting up