Home » LOWER LIMB » Knee Braces » Range of motion adjustment » Lower-extremity support AM-OSK-O/1R

Lower-extremity support AM-OSK-O/1R

Knee brace

Breathable

Class I medical device

Double-sided

Latex-free

Unicentric joint 1R

Brand: 4medic Code UNSPSC: 42241703 Code UMDNS: 18029

OPEN KNEE BRACE WITH 15° ROM ADJUSTMENT AND DROP LOCK COVER

Description

The wrap around knee brace is made of innovative fabric ProSix™.

It has two independent sets of the supporting Velcro tapes. The device is equipped with two side splints, which are made of carbon fibres and consists of special drop lock allowing for ROM adjustment in every 15°. this precise adjustment facilities the rehabilitation process.

The system of splints in wrap around knee brace is arranged in a shape of X letter, which allows to adhere perfectly to the limb and also enables to stabilize the joint precisely. This internal perforation allows skin to breath and reduces overheating. The wrap around construction enables to use the brace by seniors or overweight people.

Purpose of use

AM-OSK-O/1R brace should be applied in cases of:

knee dislocation,
knee twist and sprain,
side instability of the knee joint,
knee ligaments LCL, MCL and ACL injuries,
knee ligaments reconstruction,
other surgeries (orthopedic).

Sizes

Size	Knee circumference	How to measure
XS*	30 – 34 cm
S	30 – 34 cm
M	34 – 38 cm
L	38 – 42 cm
XL	42 – 46 cm
2XL	46 – 50 cm
3XL	50 – 55 cm

Fits for both knees.

Total length of the product:
S – 3XL: 36 cm
*- products available till the stocks run out

Gallery

Click on the photo to enlarge

Technology

MATERIALS

ProSix™

ProSix™ is an innovative fabric 3D, elastic in all directions and fitting to the limb precisely. The external layer is 3D material providing excellent stabilization. There is duothermic spacer foam providing high air permeability and compression inside. The skin has contact with cotton that is breathable and soft. ProSix™ is friendly and neutral for the skin and has Oeko-Tex Standard 100 certificate.

STIFFENINGS

Splint 1R

1R splints – single axis orthopedic splints used in all knee joint and upper limb braces, where apart from adjustment of the flection and extension angle, high lateral stabilization of the joint is not required, but important if low weight of the brace. Due to the low weight the splints are successfully used in all braced for children. They are manufactured with high quality polyamide with carbon fibres, making the splints light and neutral to the influence of sweat and salt, properly firm therefore assuring correct functioning of the device. Adjustment of the flexion and extension angle is performed with special Allen screw in every 15°. Each brace is equipped with an Allen key, which is necessary for adjustment. Standard length of the braces is: 280 and 380 mm. The splint and its design are patented in European Union by Reh4Mat Company.

Download the splint adjustment instructions

Stiffeners of thin ABS

Stiffeners made of a thin ABS plate are very light and protect the correct shape of the brace, but do not stiffen individual parts of the patient's body. The brace has the correct circumferential shape, but does not have the compensating and stiffening function of the protected joints and other protected parts of the body.