ELBOW ORTHOSIS T-RANGE

T-Range is the 1-axial telescopic elbow brace with hand grip and ergonomic range of motion adjustment. The length adjustment is possible by using maintenance-free device called press-slide.

Our brace was created to treat and control the elbow range of motion, caused by fractures, dislocations or strains.

The brace is made of elastic plastic caps that shape according to the forearm and arm anatomy. The hand grip is covered by special friendly foam. Soft sleeves, under the caps, are easy to attach. Thanks of universal length of sleeves, you can fit them to every patients.

T-Range elbow brace is equipped with straps with karabiner what allows patient to put the brace on very easy. In addition, the length of strap is possible to adjust what allows to fit the brace precisely.

Also, the hand grip allows to protect the forearm against the unrequired pronation and supination.

Our elbow brace is one of the most lightweight, telescopic and comfort elbow braces on the market.

Low weight, one circumference and excellent fitting – they’re only some assets of our elbow brace T-Range!

The brace is made of ACTIVE 3D™ and ActiveSpace™. Neck cover made of SoftComfort™

Purpose of use

• fractures of distal humerus, elbow and proximal forearm bones
• po-op elbow support
• tendons and ligaments injuries or repairs
• chronic elbow injures
• collateral ligaments reconstruction
• elbow hyperextension
• biceps and triceps tendon repairs

MiniMax principle

MiniMax is the first principle of REH4MAT that focuses on maximum effect in minimum device. Designing of our braces, we focus heavily on their effectiveness where, aside from functionality, the size of braces is significant. Unique constructions of our devices provide maximum safety and protection with little sizes. It allows to use comfortably our braces in sport shoes or under clothes.

Size	The length from the lateral epicondyle of the humerus to the wrist	How to measure
Single size	min 23 cm – max 32 cm (min 9,1″ – max 12,6″)

Size	Arm circumference 6 cm above the center of the elbow (A)	Forearm circumference 6 cm below the center of the elbow (B)	How to measure
Single size	min 22 cm – max 44 cm (min 8,7″ – max 17,3″)	min 22 cm – max 36 cm (min 8,7″ – max 14,2″)

Total length of product:
min: 49 cm (19,3″)
max: 60 cm (23,6″)
Left/right side available.

Click on the photo to enlarge

MATERIALS

Active3D™

Active3D™ is thermoformed fabric made of special foamed, cell-closed designed material. It reduces the pressure on the body or any abrasions made by orthopaedic stays and aluminum splints. It is fully waterproof fabric and does not absorb sweat. It’s easy to clean. Due to its features, the fabric is an excellent product for making medical orthopaedic braces and orthoses. ACTIVE 3D™ has various external self-gripping layers. Our material has special, thermoformed properties and may be shaped according to the functional goals of the final braces.

ActiveSpace™

ActiveSpace™ is a spacer, polyamide 3D lamination with high skin ventilation. It is very lightweight, consisted of 2 layers. Between them, we use polyamide braids. ActiveSpace™ is not elastic what improves stabilization. Inside the lamination, between 2 layers, the air flows freely, maintaining minimal water and moisture absorption. Waterproof material.

SoftComfort™

SoftComfort™ - a material specially designed to relieve very delicate places on the patient's body. The cover knit used in the production is made in such a way that it can come into contact with very sensitive skin. This raw material has the Oeko-Tex Standard 100 certificate and complies with the European REACH standard. The structure of the material consists of a very soft comfort foam laminated with a delicate cover knit. The fabric has a perforation that facilitates the flow of air through the material and allows the skin to breathe. The SoftComfort™ material is perfect for the production of linings relieving the rigid and inflexible elements of orthopedic orthoses.

TECHNOLOGICAL SYSTEMS

Press-slide System – Regulation of the length of splint

Press-slide system is the another technological newness in our offer that we would like to introduce to You with a great pleasure. The adjuster of the length of splint Press-slide is the element of orthopaedic braces, designed especially according to the innovative rule – MiniMax (minimum choice, maximum effect). That is why, orthopaedic devices equipped with Press-slide system may be characterized by small dimensions, very low weight and significant ergonomics of usage. What is more, the system was engineered to facilitate the extension or the shortening of the splint to the patient in the most easy and safe way. Press-slide was made of special kind of plastic strengthened by fiberglass and thanks to that solution its durability is much more noticeable than in case of aluminium. Adjustment of splints is very easy – you just need to press the special button and ajustd the splint so that it would be fully comfortable for you. To make that activity easier, on the surface of the lower limb splints we placed the centimeter scale that defines the distance between knee joint and the end of thigh splint and shin splint. Regarding upper limb braces, we placed the scale that simplifies the repeatable splint adjustment.

STIFFENINGS

Splint 1RE

Splints 1RE – single axis orthopedic splints, used mainly in knee joint, upper limb and hip joint braces. The characteristic quality of this splint is, apart from wide range of motion adjustment in every 15 degrees, is also hyperextension adjustment in the secured range of -15 and -30 degrees. The splints are characterized by perfect lateral joint stabilization and low weight. The set-up of the angle adjustment clock doesn’t require any tools, and special safety system prevents the change of the angle by unauthorized people. The splints are made of high quality aluminium alloy and plastic with carbon fibre. They are light and neutral to the influence of sweat and salt, properly firm, assuring correct functioning of the device. The splint and its design are patented in European Union by Reh4Mat company.

• Download the splint adjustment instructions

Upper limb stabilization system

The upper limb stabilization system consists of orthopedic splints with a drop lock regulating the range of motion of the elbow joint and the adjustable hand grip. The splint is equipped with the function of regulating its length. Adjustable forearm and shoulder supports and Velcro straps are attached to the splint, which enable the installation of soft 3D relief pads.

PADDINGS

3D supports

3D relief supports are independent technical solutions to relieve the rigid elements of a given orthosis. These elements are made of supporting foams or EVA foam. These foams are connected with various types of skin-friendly materials and materials with an adhesive function. These pads have the appropriate shape and color adapted to the type of orthosis. They relieve both metal elements of orthoses, such as splints, stays, underwires and orthopedic drop locks, as well as other elements that should not come into direct contact with the patient's skin. These pads have an anatomical shape and are made of comfortable foam with proper hardness and elasticity, guaranteeing the proper therapeutic effect.

• Declaration of Conformity EC
• Manual
• Manual (other languages)
• Setting up

ACCESSORIES / PRODUCTS TO BE USED WITH

Protective sleeve for the brace AM-RB