Pelvic brace AM-PES-05

Pelvic pain and diastasis symphysis pubis (DSP)

Women with symphysis pubis and posterior pelvis dysfunction have a lot of difficulties, decreasing their quality of life, during pregnancy. The pain id different: it may be mild or severe and it depends on the intensity. It’s unilateral or bilateral and can be located in the groin and medial aspect of thigh. Together with groin pain, the women can feel sacroiliac, low back and subprapubic pain. It’s worst during weight-bearing activities such as lifting one leg.

The most important factor of pelvic (sacroiliac joints) and symphysis pubic pain during pregnancy is instability of the pelvic girdle.

Rigid pelvic belt such as AM-PES-05 stabilizes the pelvis and reduces the pain significantly in the pelvic and symphysis pubis area.

Product description

Our pelvic brace AM-PES-05 is made of special polyester tape with high durability. The belt is equipped with 2 plastic pads with soft, off-loading cushions.
The pads can be adjusted in any place of the tape.

Pelvic belt AM-PES-05 is rigid what allows to stabilize pelvic in the frontal and sagittal plane perfectly. Increasing of the reproductive or maternal hormones causes the loosing of ligaments and other soft tissues what results in poor posture of pregnant women.

POSTURE DURING PREGNANCY

Our pelvic brace AM-PES-05 is made of special polyester tape with high durability. The belt is equipped with 2 plastic pads with soft, off-loading cushions.

Our pelvic belt AM-PES-05 provides stabilization and off-loading of the sacroiliac joints. Also, it stabilizes the symphysis pubis and prevents against the excessive stretching.

AM-PES-05 belt decreases movement at the pelvic what reduces the pain and allows women to exist normally.

To provide the highest possible level of comfort while using AM-PES-05, we equipped it with the set of additional pads. 100% of comfort and protection is the most important thing that we would like to provide to the users of our devices. That is why, the two additional pads, that may be attached to the standard plastic pads, are an ideal protection against potential abrasions. The additional pads are made of very elastic, thick neoprene foam that is one-sided tacky, so that a patient can attach them easily to the standard pads. As a result, a patient, who is using AM-PES-05, is able to adjust the device according to own needs.

The product is made of UniPren™ and Active3D™.

Purpose of use

• Diastasis symphysis pubis (DSP)
• Painful pelvis
• Instability of the pelvis
• Sacroiliac joints dysfunction
• Overweight (change in the center of gravity)
• Loosened pelvic joint

Available sizes

Size	Hip circumference at widest level	How to measure
Single size	min 65 – max 145 cm (min 25,6″ – max 57,1″)

Total height of the product:
front: 4 cm
rear: 5 cm
side pelottes: 10 cm

MATERIALS

Active3D™

Active3D™ is thermoformed fabric made of special foamed, cell-closed designed material. It reduces the pressure on the body or any abrasions made by orthopaedic stays and aluminum splints. It is fully waterproof fabric and does not absorb sweat. It’s easy to clean. Due to its features, the fabric is an excellent product for making medical orthopaedic braces and orthoses. ACTIVE 3D™ has various external self-gripping layers. Our material has special, thermoformed properties and may be shaped according to the functional goals of the final braces.

UniPren™

UniPren™ is a universal 3-layer material consisting of an external elastic polyamide cover knit with a self-adhesive function, an internal neoprene foam core and an elastic jersey cover knit. This material is characterized by softness and very high flexibility. A very important advantage of this material is the fact that it is not a knitted product, it does not have thick fibers, so that the weaves of the material do not imprint on the patient's skin and do not cause abrasionsin places of high compression. Products made of UniPren™ are the strongest and most effective stabilizing orthoses available on the market. Self-adhesive function, the raw material makes it much easier to use.

TECHNOLOGICAL SYSTEMS

CALIPER BUCKLE

CALIPER BUCKLE– it’s the special very efficient system of closure. The system consist of elastic ladder strap and metal caliper buckle with a clever ratcheting system. This system is very easy to use and there is enough to raise the cocking lever. The caliper buckle system is used for producing the orthopedic devices, required precise and strong compression. This system of closure is equipped with release lever that turns the compression immediately off. This fast ‘compression-release’ function is very useful in case of too strong compression, resulting in breathing problems of patient.

STIFFENINGS

Hip supports

Hip supports are made of ABS material. Their purpose is to effectively relieve the compression straps in the pelvic brace. Thanks to them, the high impact force of the belts on the patient's body is distributed over a much larger area, so that the local pressure on the body is much smaller. The pads have special cutouts and guides for the compression belts. On one of the orthoses, there is also a cut-out which is the base for the toothed belt.

PADDINGS

3D supports

3D relief supports are independent technical solutions to relieve the rigid elements of a given orthosis. These elements are made of supporting foams or EVA foam. These foams are connected with various types of skin-friendly materials and materials with an adhesive function. These pads have the appropriate shape and color adapted to the type of orthosis. They relieve both metal elements of orthoses, such as splints, stays, underwires and orthopedic drop locks, as well as other elements that should not come into direct contact with the patient's skin. These pads have an anatomical shape and are made of comfortable foam with proper hardness and elasticity, guaranteeing the proper therapeutic effect.

• Declaration of Conformity EC
• Manual
• Manual (other languages)
• Setting up