Upper-extremity support AM-SOB-03/AIR BLACK

Made of mesh fabric MESHspace™, assures immobilization and support of the upper limb. It can be used for left and right arm. It stabilizes and releases pressure from the arm, shoulder and elbow joint. It can be used together with other supports and plaster cast. It enables passive, approved by the doctor exercise of the arm.

Purpose of use

The shoulder stabilization should be used in following cases:
– strong pain in the shoulder joint (temporary protection)
– dislocation of the joint
– injury to the soft tissue of the shoulder and arm
– surgery of the shoulder or elbow (not requiring plaster dressing)
– in case of necessity to support or partially fix the upper limb (broken neck of humerus bone and plaster dressing)
– after removal of the plaster dressing, as stabilization

Size	The length of the forearm and hand	How to measure
S	30-36 cm (11,8″-14,2″)
M	36-42 cm (14,2″-16,5″)
L	42-48 cm (16,5″-18,9″)
XL	48-54 cm (18,9″-21,3″)
2XL	54-60 cm (21,3″-23,6″)
3XL	60-64 cm (23,6″-25,2″)

Fits for both forearms.

Click on the photo to enlarge

MATERIALS

MeshSpace™

MeshSpace™ is a very strong polyester material that we use in orthopedic products, where high strength of the detail is required, combined with a very small thickness. This raw material is produced by knitting from a very large number of thin, but very strong polyamide yarns. It has an original mesh structure with large openings, which makes it very light, very strong and very airy. An orthopedic device made of this material is neutral for the patient's skin, because no chemicals containing formaldehyde were used during the production of MeshSpace™. In addition, thanks to the fact that the product made of this material has the form of a thin mesh, fresh air successfully reaches the protected limb of the patient and sweat migrates from the skin. The MeshSpace™ material is another example of Reh4Mat's application of the following principle in the production philosophy of its products: Mini Max - minimum product / maximum effect.

SoftComfort™

SoftComfort™ - a material specially designed to relieve very delicate places on the patient's body. The cover knit used in the production is made in such a way that it can come into contact with very sensitive skin. This raw material has the Oeko-Tex Standard 100 certificate and complies with the European REACH standard. The structure of the material consists of a very soft comfort foam laminated with a delicate cover knit. The fabric has a perforation that facilitates the flow of air through the material and allows the skin to breathe. The SoftComfort™ material is perfect for the production of linings relieving the rigid and inflexible elements of orthopedic orthoses.

• Declaration of Conformity EC
• Manual
• Manual (other languages)
• Setting up