Home » UPPER LIMB » Elbow joint braces » Immobilization » Plaster cast immobilizing elbow joint AM-TL-01

Plaster cast immobilizing elbow joint AM-TL-01

Elbow brace

24h therapy

Breathable

Cast replacement

Class I medical device

Skin-friendly

Universal size

Brand: 4medic Code UNSPSC: 42241805 Code UMDNS: 18028

Code NFZ: L.050.00 L.050.01

ELBOW IMMOBILIZER

Description

Plaster cast immobilizing elbow joint AM-TL-01 has to stabilize upper extermity among the elbow joint. It has anatomic shape, thaned that it well stabilizes the extermity and its soft finish inside makes the product more comfortable.

In front part of orthese soft and ellastic pillows have been installed. They are equipped with clasps and periphery splints to let them change and fit periphery into extermity smoothly.

Two strong and small aluminium steels have been installed in the pillows. They have to be orthopedic side-splints.

In back part of the product the second pair of orthopedic splints have been mounted. They have to stabilize the extermity at the back. This way to stabilize the forearm is very effective.

The product has to be mounted to the upper extermity by using the set of periphery tapes. In the ends of the sets wide Velcro tapes and plastic tips have been mounted. The tips help persons with partial skill of hands with taking off the tapes.

The product has been fully produced with ActiveDistance II™.

Sizes

Arm circumference 10 cm above the elbow	How to measure
min 23 cm – max 36 cm (min 9,1″ – max 14,2″)

Total length of the product: 31 cm (12.2″)

Gallery

Click on the photo to enlarge

Technology

MATERIALS

ActiveDistance II™

ActiveDistance II™ is an active 3-layered fabric made of non-elastic polyamide self-gripping layer, comfort foam and cotton terry. The last one layer is responsible for maintaining your skin dry. This material is skin-friendly and has the Oeko-Tex Standard 100 certificate. Self-gripping function of ActiveDistance II™ allows to fit the braces precisely.

STIFFENINGS

Flat aluminum stays

Aluminum stays are made of a special aluminum alloy that guarantees proper stiffness with minimal weight. They have rounded ends to prevent the damage of the product and come in various widths and thicknesses. The level of stabilization of the orthopedic device is defined by proper selection of the width and thickness of the aluminum stays. The stays can be pre-profiled or flat. They do not adapt to the shape of the patient's body, an individual adjustment of the orthosis is required by proper bending of the aluminum stays in the product. Thanks to this function, it is possible to correct the position of the patient's body or the secured joint.