SPINAL ORTHOSIS AM-WSP-07

Dorso-Lumbar back support AM-WSP-07 with double closure panels was developed in order to improve the stabilization level on dorso-lumbar area of spine, maintaining comfort and its functionality for the patient.

The Orthosis is made of AirRubber™.

The Orthosis is provided with orthopedic stays, which quantity depends on the size; 4 or 6 metal stays in the Back.

The Front Panel closure is composed of four independent closures, made in semi-rigid medical laminate covered by velcro adherence textile and soft cotton terry-cloth in contact with the skin of patient. The Double closure construction makes the orthosis easy-fitting to different body shapes. (Especially recommended for women).

An asymmetric closure allows the perfect fitting on the patient body. The panel of closure is made of velcro laminate with comfortable semi-rigid foam located inside. The system GRIP & OPEN makes the orthosis easy to assemble and disassemble.

In order to improve the functionality of the product, the orthosis is equipped with two sets of two-layer elastic stays, which offer high stabilization and support on dorsal and lumbar area.

Optionally, the orthosis AM-WSP-07 could be provided with:
-TLSO Attachement – used for maximum stabilization of spine up to T7

Properties

– PATIENT-FRIENDLY PRODUCT – The lumber support is made oforthopaedic rubber which is neutral to the skin.
– HIGH EFFECTIVENSS OF STABILIZATION – thanks to the orthopedic stays and set of tightening tapes it was possible to achieve very effective stabilization.
– SAFETY – the front securing tapes increase the safety of usage of the product and eliminate the possibility of the uncontrolled opening of the device.
– COMFORT OF USAGE – the product is light and comfortable to use.

Indications

– Pre- and Post-Surgical Stabilization
– Degenerative Spinal pathologies on Lumbar area
– Disc Hernia
– Lumbar Muscles and Ligamentous Strains and Sprains
– Postural Support
– Chronic Low Back Pain
– Rehabilitation and Prevention

Size	Waist circumference	How to measure
M	75-85 cm (29,5″-33,5″)
L	85-97 cm (33,5″-38,2″)
XL	97-110 cm (38,2″-43,3″)
XXL	110-125 cm (43,3″-49,2″)
XXXL	125-145 cm (49,2″-57,1″)

Total height of the product:
front: min 22 cm (8,7″) – max 30 cm (11,8″)
rear: 33 cm (13″)

Click on the photo to enlarge

MATERIALS

AirRubber™

AirRubber™ has unidirectional elasticity and it’s breathable. This lamination is perforated. Between the braids air flows freely and skin can breathe. In addition in high compression, these rubber braids provide a gentle massage for skin. Our orthopedic rubber is very friendly for skin.

STIFFENINGS

Plastic stays

They come in various widths and thicknesses, are made of various types of plastics, such as polyamide, ABS or acrylic, and these features determine their stiffness. Thanks to their design, they are resistant to water, moisture and sweat. Products equipped with them can be washed without having to remove them from the orthosis. Our plastic stays work only in one direction, perfectly stabilize the laterally protected part of the body, adjusting to it at the same time and have a memory function, thanks to which they always return to their original shape. This function causes the stays in the orthosis to stabilize the swollen limb immediately after the injury and after the swelling has come off. The plastic stays cannot bend and that is why, they cannot correct the body posture or the secured joint.

• Declaration of Conformity EC
• Manual
• Manual (other languages)
• Setting up

ACCESSORIES / PRODUCTS TO BE USED WITH

Silicone pressure pad AM-PS

Thermoforming pad AM-PT