Torso support AM-WSP-12

Size	Waist circumference	How to measure
M	75 – 85 cm
L	85 – 97 cm
XL	97 – 110 cm
2L	110 – 125 cm
3XL	125 – 145 cm

Total height of the product:
Front
M – 3XL : 20 cm
Back with stiffening
M – 3XL : 48 cm

Click on the photo to enlarge

MATERIALS

ActiveDistance III™

ActiveDistance III™ is an active 3-layered fabric made of non-elastic polyamide self-gripping layer, comfort foam and soft fabric. What is important, ActiveDistance III™ is non-elastic fabric so it stabilizes your body in a perfect way. Thanks to using the comfort foam, the device is really soft what influences on the comfort of using it. The last layer is responsible for maintaining your skin dry.

ActiveSpace™

ActiveSpace™ is a spacer, polyamide 3D lamination with high skin ventilation. It is very lightweight, consisted of 2 layers. Between them, we use polyamide braids. ActiveSpace™ is not elastic what improves stabilization. Inside the lamination, between 2 layers, the air flows freely, maintaining minimal water and moisture absorption. Waterproof material.

TECHNOLOGICAL SYSTEMS

TLS - TapeLacing Compression System

TapeLacing Compression System was created to adjust the best joint support and stabilization. The system allows to adjust different levels of compression according to patient’s needs. This adjustment is smooth what provides comfort of use the brace.

The TLS System is a combination of metal grommets, nylon tapes and Velcros. The additional equipment is the special element that is easy to attach what allows to modify device’s shape or circumference. You can achieve required compression with a single pull strap. One easy pull securely forms the brace to the patient’s torso and provides intra-abdominal compression, reducing the load on intervertebral discs.

TLS System is the compression solution so you can use it only after putting the brace on the body.

ATTENTION: Our TapeLacing Compression System is very effective with big interaction strength so it’s necessary to use it with caution.

STIFFENINGS

Abdominal pad

The abdominal pad of the orthopedic spine brace is made of ABS. It has an anatomical shape with rounded edges and special longitudinal cuts, thanks to which it is very easy to shape in the horizontal axis and maintains high stiffness in the vertical axis. Such a structure allows the orthosis to easily adjust to the abdominal section of the patient and, thanks to the vertical cuts, the patient's skin breathes as air is supplied to it.

Lumbar ABS stiffenings

Low - LSO support and high - TLSO support are made of ABS. The pads are soft, they easily adapt to the body, stiffening the appropriate section of the spine. They are available in several sizes and are used in orthopedic products as their main stiffening element. The ABS supports have a smooth system of shaping them, along with its full stabilization, made of tapes with velcro fasteners. The tapes on the side elements of the support allow you to set the shape of the pelotte in such a way that it will stabilize the patient's torso on both sides. The middle strap in the low LSO support sets the appropriate level of lumbar lordosis, while the middle strap in the high TLSO support sets the appropriate level of lumbar lordosis and thoracic kyphosis. Additionally, the pads have internal velcro fasteners that allow for attaching soft relief cushions to them, which separate the ABS supports from the patient's body.

• Declaration of Conformity EC
• Manual
• Manual (other languages)
• Setting up