PLASTIC STIFFENING
FLAT
Abdominal pad
The abdominal pad of the orthopedic spine brace is made of ABS. It has an anatomical shape with rounded edges and special longitudinal cuts, thanks to which it is very easy to shape in the horizontal axis and maintains high stiffness in the vertical axis. Such a structure allows the orthosis to easily adjust to the... Read more »
ABS sole insole
The orthosis insert is made of ABS and is available in many sizes, in right and left version. Thanks to the stiffness of the insole, the foot is lifted on the sole of the entire surface. The profiled back shell is made of a polyethylene, it easily adjusts to the shape of the limb and stiffens the orthosis in the... Read more »
Ankle support
The ankle support is made of ABS material. It has an anatomical shape and longitudinal cuts, thanks to which it is very easy to shape in the horizontal axis and maintains high stiffness in the vertical axis. Such a construction allows the ankle brace to easily adjust to the shape of the lower leg, and thanks to the... Read more »
Hip supports
Hip supports are made of ABS material. Their purpose is to effectively relieve the compression straps in the pelvic brace. Thanks to them, the high impact force of the belts on the patient's body is distributed over a much larger area, so that the local pressure on the body is much smaller. The pads have... Read more »
Lumbar ABS stiffenings
Low - LSO support and high - TLSO support are made of ABS. The pads are soft, they easily adapt to the body, stiffening the appropriate section of the spine. They are available in several sizes and are used in orthopedic products as their main stiffening element. The ABS supports have a smooth system of shaping... Read more »
Lumbar supports
Low and high lumbar supports are made of polyethylene injection technology. The supports are embossed in the shape of the vertebrae of the spine, thanks to which it does not press on the spine, but relieves the back muscles. The product is equipped with the manufacturer's logo and a path for the seam. They... Read more »
Orthopedic stays from ABS
Orthopedic stays available in various width, thickness and shapes are cut from ABS boards. Their role is not to stiffen the orthosis in order to support a joint or other part of the body, but to prevent wrinkling and uncontrolled movement of the fabrics of the orthosis./p> Read more »
Plastic stays
They come in various widths and thicknesses, are made of various types of plastics, such as polyamide, ABS or acrylic, and these features determine their stiffness. Thanks to their design, they are resistant to water, moisture and sweat. Products equipped with them can be washed without having to remove them from... Read more »
Stiffeners of thin ABS
Stiffeners made of a thin ABS plate are very light and protect the correct shape of the brace, but do not stiffen individual parts of the patient's body. The brace has the correct circumferential shape, but does not have the compensating and stiffening function of the protected joints and other protected parts... Read more »
Stiffening elements for the scoliosis corset
The stiffening elements for the BOA corset for the scoliosis treatment are designed and made of ABS. The other elements of the BOA Fit System are attached to these ABS stiffeners. The structure of the stiffeners is very strong longitudinally - they do not stretch under the action of the longitudinal forces, but... Read more »
Supports made of ABS
Thermoplastic plate
PROFILED
Ankle shells
Anatomical ankle shells are made by injection of ABS material. The shells come in various sizes and are available as stiffeners for the right and left limb, as well as internal and external stiffeners. They are used to construct various types of ankle orthoses. Braces containing these shells are highly effective in... Read more »
Finger splint
Finger splints are the kind of simple orthoses that support the metacarpophalangeal joints (MCP). The splint is made of ABS and pre-shaped to fit to the fingers. Velcro fasteners are installed on the splint, to which the elastic circumferential bands are attached. Read more »
Fingers support element
The finger support element of the palm brace consists of injection-molded ‘bones’ of polyamide and stainless steel. This set has a system of angular adjustment of individual phalanges, thus enabling the desired positioning of the fingers of the hand. This element has been designed so that it can be installed in... Read more »
Foot drop orthosis
The foot drop orthosis is available in different sizes for the right and left leg. It consists of a sole insert, a spiral stiffening and a shin pad. It is made of carbon fiber, locally reinforced with Cevlar. Rotary buckles are installed to the shin pad to enable the correct placement of the rear belt. Read more »
Half-insole
The half-insole is made of ABS material and it is an additional element stabilizing the ankle joint and preventing it from twisting. The patient, by burdening the insole, prevents it from moving in the shoe, and thanks to this, strong side straps stabilize the ankle joint and significantly reduce the possibility of... Read more »
Palm stiffening
Full stiffening of the palm brace is a unique solution made of ABS material. The stiffening is anatomically designed and covers the right and left hands. It has a system of special cutouts for elastic straps that stabilize each finger separately and the wrist. From the bottom of the patient’s palm there is a... Read more »
Patella frame
The frame of the patella brace is made of anatomically shaped ABS. Four rotating buckles are installed to the frame, that allow for a perfect fit of the circumferential straps to the limb. The frame can be heated with a heat gun and adjusted individually to each patient. Velcro grippers are glued to the frame from... Read more »
Shin support
Shoulder shells
Shoulder shells are anatomic-shaped 3D orthopedic system made of low profile ABS which maintains the shape of user’s body. The system consists of external and internal arm shell. The shells are equipped with swivel buckles and cut-outs for circumferential straps. The shells have Velcro fasteners on the inside,... Read more »
Stabilizer with an articulated joint
Stabilizing pads
The stabilizing elements made of ABS are part of the skeleton system of the HKAFO brace. They have been anatomically shaped and have very wide ranges of adjustment of their width and circumference. They are also equipped with rotary buckles. In addition, the system also includes external and medial orthopedic... Read more »
Stiffening elements of the lower limbs
The stiffening elements of the lower limbs are thermoformed femoral and shin pads, as well as orthopedic splints with a knee drop-lock adjusting the angle of flexion and extension of the joint. They have the ability to fit the length and cutouts for the circumferential straps. Soft 3D relieving pads can be attached... Read more »
Thumb stiffening insert
The thumb stiffening insert is made of anatomically profiled ABS material. The insert has been designed and made so that it can be installed inside a palm brace. The thumb stiffens the thumb and keeps it abducted. Read more »
Upper limb shell
The shell of the upper limb is made of an openwork form of two anatomically formed ABS elements connected with an elbow hinge. Rotary buckles are attached to the shell to enable the fitting of the circumferential straps on the limb. It is also equipped with metal elements with adjustable screw that is used to... Read more »
Upper limb stabilization system
The upper limb stabilization system consists of orthopedic splints with a drop lock regulating the range of motion of the elbow joint and the adjustable hand grip. The splint is equipped with the function of regulating its length. Adjustable forearm and shoulder supports and Velcro straps are attached to the... Read more »
Upper limb stabilization system for children
The upper limb stabilization system for children consists of orthopedic splints with a drop lock regulating the range of motion of the elbow joint and the adjustable hand grip. The splint is equipped with the function of regulating its length. Adjustable forearm and shoulder supports and Velcro straps are attached... Read more »
