PROFILED
Ankle shells
Anatomical ankle shells are made by injection of ABS material. The shells come in various sizes and are available as stiffeners for the right and left limb, as well as internal and external stiffeners. They are used to construct various types of ankle orthoses. Braces containing these shells are highly effective in... Read more »
Finger splint
Finger splints are the kind of simple orthoses that support the metacarpophalangeal joints (MCP). The splint is made of ABS and pre-shaped to fit to the fingers. Velcro fasteners are installed on the splint, to which the elastic circumferential bands are attached. Read more »
Fingers support element
The finger support element of the palm brace consists of injection-molded ‘bones’ of polyamide and stainless steel. This set has a system of angular adjustment of individual phalanges, thus enabling the desired positioning of the fingers of the hand. This element has been designed so that it can be installed in... Read more »
Foot drop orthosis
The foot drop orthosis is available in different sizes for the right and left leg. It consists of a sole insert, a spiral stiffening and a shin pad. It is made of carbon fiber, locally reinforced with Cevlar. Rotary buckles are installed to the shin pad to enable the correct placement of the rear belt. Read more »
Half-insole
The half-insole is made of ABS material and it is an additional element stabilizing the ankle joint and preventing it from twisting. The patient, by burdening the insole, prevents it from moving in the shoe, and thanks to this, strong side straps stabilize the ankle joint and significantly reduce the possibility of... Read more »
Palm stiffening
Full stiffening of the palm brace is a unique solution made of ABS material. The stiffening is anatomically designed and covers the right and left hands. It has a system of special cutouts for elastic straps that stabilize each finger separately and the wrist. From the bottom of the patient’s palm there is a... Read more »
Patella frame
The frame of the patella brace is made of anatomically shaped ABS. Four rotating buckles are installed to the frame, that allow for a perfect fit of the circumferential straps to the limb. The frame can be heated with a heat gun and adjusted individually to each patient. Velcro grippers are glued to the frame from... Read more »
Shin support
Shoulder shells
Shoulder shells are anatomic-shaped 3D orthopedic system made of low profile ABS which maintains the shape of user’s body. The system consists of external and internal arm shell. The shells are equipped with swivel buckles and cut-outs for circumferential straps. The shells have Velcro fasteners on the inside,... Read more »
Stabilizer with an articulated joint
Stabilizing pads
The stabilizing elements made of ABS are part of the skeleton system of the HKAFO brace. They have been anatomically shaped and have very wide ranges of adjustment of their width and circumference. They are also equipped with rotary buckles. In addition, the system also includes external and medial orthopedic... Read more »
Stiffening elements of the lower limbs
The stiffening elements of the lower limbs are thermoformed femoral and shin pads, as well as orthopedic splints with a knee drop-lock adjusting the angle of flexion and extension of the joint. They have the ability to fit the length and cutouts for the circumferential straps. Soft 3D relieving pads can be attached... Read more »
Thumb stiffening insert
The thumb stiffening insert is made of anatomically profiled ABS material. The insert has been designed and made so that it can be installed inside a palm brace. The thumb stiffens the thumb and keeps it abducted. Read more »
Upper limb shell
The shell of the upper limb is made of an openwork form of two anatomically formed ABS elements connected with an elbow hinge. Rotary buckles are attached to the shell to enable the fitting of the circumferential straps on the limb. It is also equipped with metal elements with adjustable screw that is used to... Read more »
Upper limb stabilization system
The upper limb stabilization system consists of orthopedic splints with a drop lock regulating the range of motion of the elbow joint and the adjustable hand grip. The splint is equipped with the function of regulating its length. Adjustable forearm and shoulder supports and Velcro straps are attached to the... Read more »
Upper limb stabilization system for children
The upper limb stabilization system for children consists of orthopedic splints with a drop lock regulating the range of motion of the elbow joint and the adjustable hand grip. The splint is equipped with the function of regulating its length. Adjustable forearm and shoulder supports and Velcro straps are attached... Read more »
